Description
Effortlessly dispense your favorite foaming soaps with our 180 mL Clear PET 43mm Foamer Style Cylinder Round. The sleek design and easy-to-use pump make hand washing a breeze. Experience a luxurious lather while reducing the amount of soap needed with this innovative foam dispenser.
The appropriate dip tube lengths are listed below.
Foamer pump 5 7/16"
Product Details
| Capacity | 180 mL |
| Finish | 43mm |
| Case pack | 416 units |
| Color | Clear |
| Material | PET (polyethylene terephthalate) |
| Recycling code | #1 PET |
| Dip tube length | 5.25" How to measure |
| Height | 5.25" |
| Diameter | 1.87" |
| Spec sheet | View file |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Matching products
Material at a glance
PET · Polyethylene terephthalate
Clear, lightweight and shatter-resistant, with a good barrier against moisture and gases.
Maximum temperature
- Clarity
- Clear
- Strength
- Shatter-resistant
- Rigidity
- Semi-rigid to rigid
- Barrier
- Good moisture, oxygen and CO₂ barrier
Great for
- Beverages and food
- Personal care and clear retail packaging
Avoid
- Heat above 140–160°F
- Strong solvents like acetone
General material information. Always test compatibility with your product; free samples are available.
Liner at a glance
Foam liner
A general-purpose, economical liner made of low-density PE foam. It stays in the cap for repeated use and seals when the cap is screwed on tightly.
- Seal
- Compresses against the rim when tightened
- Reusable
- Yes, stays in the cap
Great for
- Foods and beverages
- Cosmetics
- Industrial and household chemicals
General guidance based on industry recommendations. Always test compatibility with your product; free samples are available.
Dip tube at a glance
5.25" dip tube
Measured from the underside of the closure, where it rests on the bottle rim, straight down to the tip of the tube.
- Dip tube length
- 5.25"
- Bottle inside depth
- About 5.38"–5.5" (tube 1/8"–1/4" shorter than the bottle)
- Neck finish
- 43mm
- Too long?
- Plastic tube; trim to length with a slight angle on the cut
Great for
- Bottles with an inside depth of about 5.38" to 5.5"
- Deeper bottles, if a little product left at the bottom is acceptable
Avoid
- Bottles shallower than 5.25" inside, unless you trim the tube (a long tube kinks and the pump won't seat)
Tip: Measure your bottle from the top of the neck to the inside of the base, then choose a tube 1/8" to 1/4" shorter.
General guidance based on industry recommendations. Always test the fit with a free sample before ordering.
Real people. Real service.
Need a large volume? Talk to a packaging specialist.
Ordering by the pallet, or need help matching containers and closures? Tell us what you’re packaging and we’ll put together the right combination, with free samples to test first.